bing tracking image

Best Mitsubishi Endeavor Bike Racks

change vehicle


Bike Rack Videos

Yakima Holdup Hitch Bike Rack Review - 2011 Mitsubishi Endeavor

Today were going to show our test fit of the Yakima Holdup 2 bike rack on our 2011 Mitsubishi Endeavor. What we are going to do first is to install the bike rack into the hitch. We will line up the pin hole and install the anti-rattle pin. With our anti-rattle pin secured, we will install the safety pin. Now that this bike rack is fully secured, what we are going to do is show you some clearances from the hitch to the ground and then we will fold the bike rack down and give you the clearances between the rack and our ground. We will also give you the clearance between the nearest point of the bike rack to the bumper.



Yakima FrontLoader Roof Bike Rack Review - 2011 Mitsubishi Endeavor

Today on this 2011 Mitsubishi Endeavor we are going to do a test fit of part number Y02103 from Yakima. This is a FrontLoader wheel mount bike carrier. Now our vehicle has already been outfitted with our Yakima roof rack system and were going to install our bicycle carrier already assembled according to instructions. So it is just a matter of installing it on our roof rack. We will go ahead and open up the clamp. For the first crossbar, go through the front. We will put that in place and then slide our second clamp into place for the cross bar in the back. Once we have had it located on the bars, we will make sure that they are secure on the vehicle roof rack. We can then go ahead and tighten them down.



Thule Vertex 4 Hitch Bike Rack Review - 2011 Mitsubishi Endeavor

Alright today on this 2011 Mitsubishi Endeavor we are going to test fit of the Thule bicycle rack part number TH9029 from Thule, the Vertex 4. A couple of quick notes about this bicycle rack is that will work with a 1-1/4 inch receiver hitch on class one and class two. However the class one receiver hitch, you are limited to two bicycles. Now our application here has a 2 inch receiver on it so we will use a 2 inch spacer that is included with the bike rack. OK, we will go ahead and start by installing the bike rack into the hitch and then we will tighten down the anti-rattle bolt. Now the bike rack does come with a tool to tighten down the bolt, however a 3/4 inch ratchet wrench works good too.



Rhode Gear Highway Hitch Bike Rack Review - 2011 Mitsubishi Endeavor

Today in our 2011 Mitsubishi Endeavor, we're going to do a test fit of the Rhode Gear Highway 2 Bike Carrier, product number RG8015220. Well, a quick note about this bicycle rack, they work with class 1 and class 2 receiver hitches and also work with 2 by 2 receiver hitches with the include spacer. We'll start our test fit by installing the bicycle rack into the hitch. We'll add the hitch pin holes and then install the anti-rattle bolt. Alright, next, we'll go ahead and give you some measurements that will give you idea of the clearance between the bicycle rack and the SUV, and the ground. From the bike rack to the closest point of the bumper is looking about 5-1/2 inches.





Mitsubishi Endeavor Bike Rack Questions